Skip to content
Dossier · ExplainerSensingUpdated Q4 2026 ·

What Are Quantum Sensors, and Where Are They Already Used?

First version 4 min11/11 facts confirmed

A quantum sensor uses a small quantum system as the part that touches the world, according to NIST. That system is most often atoms, electron spins or superconducting circuits. It measures a physical quantity in a way classical physics alone cannot match. Most quantum sensors follow the same three-step loop, NIST says: prepare a known quantum state, let the world nudge it, then read out the change. NIST lists three advantages this gives over classical instruments. Sensitivity is one, down to detecting the energy of a single photon. Self-calibration is another, because atoms of a given type are always identical, unlike mechanical parts. Small size follows, since the devices are built around atoms or microscopic circuits.

A technology older than the word “quantum sensor”

NIST traces the practical history of quantum sensing through four milestones. The atomic clock came first, invented in 1949. Magnetic field sensors using atomic spins followed from the 1950s. Superconducting quantum interference devices, or SQUIDs, came from the 1960s. Magnetic resonance imaging, which uses quantum spin to image the body, dates to the 1970s. The label “quantum sensor” is newer than the hardware it describes.

Reading magnetic fields three ways

Quantum magnetometers are far more sensitive than classical devices such as compasses or flux-gate magnetometers, NIST says. They come in three main kinds. SQUIDs use a superconducting loop whose current oscillates as a magnetic field is applied. Atomic magnetometers trap billions of caesium or rubidium atoms and align their electron spins with polarised laser light. They then measure how a magnetic field deflects those spins. Nitrogen-vacancy, or NV, centre magnetometers read magnetic-field effects on electron spins in diamond defects with laser light.

These devices are already in clinical and field use. Quantum magnetometers power magnetoencephalography, which images the brain’s magnetic activity, NIST says. It helps diagnose epilepsy, multiple sclerosis, Alzheimer’s disease and schizophrenia. NIST itself first demonstrated the equivalent technique for the heart, magnetocardiography, in 2014. That demonstration was for monitoring a fetal heartbeat. Beyond medicine, NIST points to quantum magnetometers already helping locate underground minerals and buried archaeological sites. They also support dark-matter research and microwave astronomy observations. An emerging use is measuring Earth’s magnetic field for GPS-free navigation.

Turning falling atoms into a gravity sensor

Quantum gravimeters work differently. According to NIST, they cool atoms to near absolute zero to bring out their wave nature. A laser pulse then splits each atom’s wave into two paths. Those paths fall along slightly different trajectories, where gravity differs by a tiny amount. A second laser pulse recombines the waves into an interference pattern that encodes that gravitational difference, NIST says.

One use is already commercial. Companies use portable atomic clocks positioned above the seabed to detect oil deposits, NIST says. A deposit’s slightly stronger gravitational pull makes a clock above it tick marginally more slowly than a reference clock elsewhere. That effect is predicted by Einstein’s general relativity. NIST lists further, still-emerging gravimeter uses. They include tracking lava movement inside volcanoes and finding mineral or oil deposits. Others are monitoring how much water an aquifer holds and how fast it recharges, and detecting hidden tunnels or voids under infrastructure. NIST also names sharpening the definition of the kilogram through more accurate local gravity readings, and GPS-independent navigation for submarines and deep-space vehicles. One quantum gravimeter unit has already been launched into space, NIST notes.

Clocks as physics tools

According to NIST, an atomic clock’s tick rate depends on quantum energy levels. General relativity says those levels run slower in stronger gravity. So scientists have used atomic clocks as gravity sensors for precision tests of Einstein’s theory, NIST says. That has included detecting tiny differences in ticking rates between atoms separated by just a millimetre in height. More recently it has meant placing ultra-accurate clocks on mountains and aboard the International Space Station.

Europe’s research pipeline

Germany’s national aerospace research centre, DLR, runs a Quantum Sensing department. It develops inertial sensors based on atom interferometry, the same wave-splitting principle behind quantum gravimeters. The aim is high-precision measurement of rotation and acceleration with long-term stability that avoids the drift of conventional mechanical sensors. DLR names terrestrial and satellite gravimetry and gradiometry, Earth observation, and navigation and exploration as the application areas it is developing the technology for.

What to watch

Medical imaging, oil and mineral survey, and relativity tests already rest on quantum sensors in service today. The gravimeter applications NIST and DLR describe are the next ones to move from research programme to routine use. They range from volcano monitoring to GPS-free navigation for submarines and spacecraft.

Sources

  1. [1]Quantum Sensing Explained NIST
  2. [2]Quantum Sensors for a Magnetic World NIST
  3. [3]Turning Atoms Into Waves to Measure Gravity and More NIST
  4. [4]Atomic Clocks: Exquisite Sensors of More Than Just Time NIST
  5. [5]Quantum Sensing Deutsches Zentrum für Luft- und Raumfahrt (DLR) / Quantencomputing-Initiative
MethodologyHow this article was made
Facts confirmed
11 / 11
Sources
5
Last checked
Nov 12, 2026
Image
Photo

This article was written by an AI system from facts in international trade media, publications by companies and research institutes and public sources, with the source for every fact, and checked under our methodology. The byline is an editorial pseudonym. Found an error? Report it through the contact page.

Facts used

  1. A quantum sensor uses a small quantum system, most often atoms, electron spins or superconducting circuits, as the part that interacts with the world, to measure a physical quantity in a way that is impossible with classical physics alone, the US National Institute of Standards and Technology (NIST) says. Most quantum sensors follow the same three-step loop, NIST says, they prepare a known quantum state, let the world nudge it, then read out the change. NIST · Nov 12, 2026
  2. NIST lists three advantages of quantum sensors over classical ones, greater sensitivity, down to detecting the energy of a single photon, self-calibration (because, unlike mechanical parts, atoms of a given type are always identical and their properties never change) and small size, since they are built around atoms or microscopic circuits. NIST · Nov 12, 2026
  3. NIST traces quantum sensing's practical history through atomic clocks, invented in 1949, magnetic field sensors using atomic spins, from the 1950s, superconducting quantum interference devices (SQUIDs), from the 1960s, and magnetic resonance imaging (MRI), which uses quantum spin to image the body and dates to the 1970s. NIST · Nov 12, 2026
  4. Quantum magnetometers are far more sensitive than classical devices such as compasses or flux-gate magnetometers, NIST says, and come in three main kinds, SQUIDs, which use a superconducting loop whose current oscillates as a magnetic field is applied; atomic magnetometers, which trap billions of caesium or rubidium atoms, align their electron spins with polarised laser light, then measure how a magnetic field deflects those spins; and nitrogen-vacancy (NV) centre magnetometers, which read magnetic-field effects on electron spins in diamond defects with laser light. NIST · Nov 12, 2026
  5. Quantum magnetometers are already used in magnetoencephalography (MEG), which images the brain's magnetic activity to help diagnose epilepsy, multiple sclerosis, Alzheimer's disease and schizophrenia, NIST says. NIST itself first demonstrated magnetocardiography (MCG), the equivalent technique for the heart, in 2014, for monitoring a fetal heartbeat. NIST · Nov 12, 2026
  6. Beyond medicine, NIST points to quantum magnetometers already helping locate underground minerals and buried archaeological sites, supporting dark-matter research and microwave astronomy observations, and, as an emerging use, measuring Earth's magnetic field for GPS-free navigation. NIST · Nov 12, 2026
  7. Quantum gravimeters measure gravity by cooling atoms to near absolute zero to bring out their wave nature, then using a laser pulse to split each atom's wave into two paths that fall along slightly different trajectories, where gravity differs by a tiny amount; a second laser pulse recombines the waves into an interference pattern that encodes the gravitational difference, NIST says. NIST · Nov 12, 2026
  8. Portable atomic clocks are a gravity sensor already at work commercially, NIST says, companies use them to detect oil deposits under the ocean, because a deposit's slightly stronger gravitational pull makes a clock positioned above it tick marginally more slowly than a reference clock elsewhere, an effect predicted by Einstein's general relativity. NIST · Nov 12, 2026
  9. NIST lists further, still-emerging uses for quantum gravity sensors, tracking lava movement inside volcanoes and finding mineral or oil deposits, monitoring how much water an aquifer holds and how fast it recharges, detecting hidden tunnels or voids under infrastructure, sharpening the definition of the kilogram through more accurate local gravity readings, and GPS-independent navigation for submarines and deep-space vehicles; NIST notes one quantum gravimeter unit has already been launched into space. NIST · Nov 12, 2026
  10. Because an atomic clock's tick rate depends on quantum energy levels that general relativity says run slower in stronger gravity, scientists have used atomic clocks as gravity sensors for precision tests of Einstein's theory, NIST says, including detecting tiny differences in ticking rates between atoms separated by just a millimetre in height, and, more recently, placing ultra-accurate clocks on mountains and aboard the International Space Station. NIST · Nov 12, 2026
  11. Germany's national aerospace research centre DLR runs a Quantum Sensing department developing inertial sensors based on atom interferometry, aiming for high-precision measurement of rotation and acceleration with long-term stability that avoids the drift of conventional mechanical sensors; DLR names terrestrial and satellite gravimetry and gradiometry, Earth observation, and navigation and exploration as the application areas it is developing the technology for. DLR · Nov 12, 2026